7
2. Safety Precautions
To ensure correct use of this instrument, read the following points carefully and
adhere to them. After you have read this manual, keep it in a safe place where
it can be referred to anytime a question arises. If you pass this instrument to
somebody else, make sure to include these instructions.
WARNING (Failure to adhere to the following points
may result in death or serious injury.)
Safety Precautions
Do not use the instrument in
places where flammable or
combustible gases (gasoline etc.) are
present. Doing so may cause fire.
Do not disassemble or modify
the instrument . Doing so may cause
a fire or electric shock.
Take special care not to allow
liquid or metal objects to enter
the instrument. Doing so may cause
a fire or electric shock. Should liquid or metal
objects enter the instrument, remove the battery
and/or disconnect the USB interface cable
immediately, and contact the company where you
purchased the instrument.
The instrument should not be
operate if it is damaged, or if
smoke or odd smells occur. Doing so
may result in a fire. In such situations, remove the
battery and/or immediately disconnect the USB
interface cable, and contact the company where
you purchased the instrument.
CAUTION (Failure to adhere to the following points may result in injury
or in damage to the instrument or other property)
Do not use batteries other
than those specified. When
installing batteries in the instrument,
make sure that they are correctly oriented
according to the (+) and (-) marks. Failure to
adhere to these instructions may cause batteries
to explode or leakage of electrolytes, resulting in
fire, injury or air pollution.
Only devices that meet the
requirements for low-voltage
safety can be connected to the
USB interface.
Do not dispose of batteries in fire,
short the terminals, apply heat to
them, or disassemble them. Also, do
not recharge them. Doing so may cause
explosion or heat generation, resulting in fire or
injury.
To Next Page
Loading...
Need help?
General
