Konica Minolta MULTI GLOSS 268Plus User Manual

37
11 Geometry
In this menu, you can select the geometry for the
gloss measurement.
11.1 Geometry selection
Choose Gloss Geometry from the Geometry menu.
You can choose between the representation of one,
two or all three geometries in the display.
The currently set angle combination is indicated in
the Geometry menu by a check mark.
Select the desired combination with the scroll wheel
and then confirm by pressing mode.
When Save is turned on, switching the geometry
automatically causes the program to switch to the
appropriate predefined area of memory.
Geometry

Konica Minolta MULTI GLOSS 268Plus Specifications

General

Brand	Konica Minolta
Model	MULTI GLOSS 268Plus
Category	Measuring Instruments
Language	English