Need help?Do you have a question about the Konsberg Simrad PX MultiSensor Mk2 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Manufacturer | Kongsberg Simrad |
| Model | PX MultiSensor Mk2 |
| Depth Rating | 6000 m |
| Tilt Accuracy | ±0.1° |
| Conductivity Accuracy | ±0.01 mS/cm |
| Protection Rating | IP68 |
| Housing Material | Titanium |
| Output | RS-232, RS-485 |
| Temperature Range | -5°C to +35°C |
Identifies the intended users and where to find additional manuals and product information.
Details registered trademarks and provides a channel for user feedback.
Lists the specific measurements a sensor can make based on its lid type and physical location.
Lists optional items that can be purchased separately for the PX MultiSensor Mk2 system.
Details key performance metrics like depth, accuracy, beamwidth, range, and update rate.
Provides information on battery life, charging time, and physical dimensions and weight.
Covers power needs and operational/storage temperature and depth ratings.
Provides contact information for support offices in Canada, Malaysia, Korea, and China.
Details on how to install the sensor onto a trawl door.
Instructions for mounting the sensor on the trawl clump and wing.
Procedure for installing the sensor on the headrope.
Procedure for initial calibration of roll and pitch for new sensors.
How to input pre-existing calibration values from an old sensor.
Regular upkeep practices including cleaning charger sockets, inspecting screws, and general sensor care.
Procedures for maintaining the charger, changing pins, and charging the sensor battery.
Guides for verifying charger output, diagnosing noise, checking readings, offsets, blanking zones, and range settings.
To Next Page