Konsberg Simrad PX MultiSensor Mk2 - Installation on Trawl Door

454200/A
15
Installationonthetrawldoor
TypicalmeasurementsfromthedoorsareSpread,PitchandRoll,andHeight.Other
usefulmeasurementsareDepthandTemperature.Thesensorcanalsobethe“remote”
deviceforGeometryandSpreadmeasurements.
Note
Ifyouwantyoursensorto
measurethepitchandroll
ofthetrawldoors,youmust
calibrateit.
WhenaPXMultiSensorMk2
istobemountedonatrawl
doororontheclump,youneed
toplaceitinadedicatedsensor
pocket.
•Ifthesensorisplacedinthe
starboard
trawldooradapter
(A):
–Thefrontofthesensormustpointtowardsthevessel(FWD).
–Thesidetransducerelement,pointstothebottomtomeasureheight.
–Thedowntransducerelementpointstotheporttrawldoor.Itisusedastheremote
deviceforthespreadmeasurement.
•Ifthesensorisplacedintheport
trawldooradapter(B):
–Toguaranteecommunication,thecommunicationandfronttransducerelements
mustpointtowardsthevessel(FWD).
–Thesidetransducerelementpointstothestarboardtrawldoortomeasurespread.
–Thedowntransducerelementpointstothebottomtomeasureheight.
Relatedtopics
Calibration,page21
ConguringaPXsensor,page19
Installationontheclump,page16
MountingthePXMultiSensorMk2onthetrawlgear