Korg M3 Owner's Manual

Parameter guide
24
MSEQ Resolution (3…, Absolute):
Controls the playback speed of the modulation sequence as
a timing resolution relative to the tempo.
Tone Adjust Default Settings
Tone Adjust provides an elegant physical interface to the
parameters. Most of the factory sounds use the default
layout, as shown above. You can also customize the layout
for individual sounds, if desired.
For more information about Tone Adjust, please see “0–8g:
Tone Adjust” on page 21 of the M3 parameter guide.
RADIAS Tone Adjust parameters
The EXB-RADIAS supports all of the Common Tone Adjust
parameters, as described under “Common Tone Adjust
Parameters,” on page 22. It also adds a number of its own
original RADIAS Tone Adjust parameters.
RADIAS Tone Adjust default Settings
[OSC1]
Level
[OSC1]
Mod
[OSC2]
Level
[OSC2]
Mod
Unison
Filter
Resonance
Drive/
WS Depth
Mod Seq
Sw
[OSC1]
Control1
[OSC1]
Control2
[OSC2]
Semitone
[OSC2]
Tune
F/A EG
Attack Time
F/A EG
Decay Time
F/A EG
Sustain Level
F/A EG
Release Time

Korg M3 Specifications

General

Synthesis Type	EDS (Enhanced Definition Synthesis)
Sound Engine	EDS (Enhanced Definition Synthesis)
MIDI	In, Out, Thru
Keyboard	61-key, velocity-sensitive, aftertouch
Sequencer	16-track MIDI sequencer
Sampling	Open Sampling System
Display	TouchView graphical user interface with 320x240 color TFT LCD
Arpeggiator	2 polyphonic arpeggiators
Controllers	Joystick, Ribbon Controller
Outputs	L/MONO, R, Individual 1-4, Headphones
USB	Yes, USB MIDI
Storage	SD card slot
Combinations	1, 792 user combinations
Polyphony	120 voices (max)
Effects	5 Insert effects, 2 Master effects, 1 Total effect