Korg M3 - Tone Adjust; 0-8 G: Tone Adjust; COMBI P1: DT;X-Y;Ctrls

COMBI P1: DT/X–Y/Ctrls Tone Adjust
49
Tone Adjust
0–8g: Tone Adjust
For details on the Tone Adjust function, refer to “M3
parameter guide.”
Common Tone Adjust Parameters
These are the same as the Common Tone Adjust Parameters
in Program mode.
For more information, please see “Common Tone Adjust
Parameters” on page 22.
RADIAS Tone Adjust Parameters
These are the same as the RADIAS Tone Adjust Parameters
in Program mode.
For more information, please see “RADIAS Tone Adjust
Parameters” on page 23.
COMBI P1: DT/X–Y/Ctrls
Here you can select a pattern for the drum track and make
settings for it, as well as make settings for X-Y control and
pads 1–8.
For details on the available parameters and menu
commands, please see “COMBI P1: DT/XY/Ctrls” on page
138 of the M3 parameter guide.