Menu Command Load Preload/Demo Data
65
Global mode
Here we will explain only the menu commands “Load
Preload/Demo Data” and “Set Program User-Bank Type.”
For details on the other parameters and menu commands,
refer to “Global mode” in the M3 parameter guide. (☞M3
parameter guide p.355)
Menu Command
Load Preload/Demo Data
This command loads the preload data and demo song data
into the M3.
Here we will explain only how to load RADIAS programs
and formant motion data. For details on loading other data,
please see “Load Preload/Demo Data” on page 382 of the
M3 parameter guide.
Before you load this data, uncheck Program in Memory
Protect (☞M3 parameter guide p.359). If you execute
with this item still checked, a message of “Memory
Protected” will appear, and the data will not be loaded.
1. Select “Load Preload/Demo Data” to open the
dialog box.
2. Use “Kind” to select the type of data you want to
load.
Loading RADIAS programs
In the “Kind” field, select Program.
If you specify Bank as the range to be loaded, select I-F as
the load-source data, and I-F or a user bank set to the
RADIAS bank type as the load-destination (“To:”). (☞M3
parameter guide p.66)
If you specify Single as the range to be loaded, select a
program from bank I-F as the load-source, and a program
number in I-F or a user bank set to the RADIAS bank type as
the load-destination (“To”).
Loading formant motion data
In the “Kind” field, select RADIAS Formant Motion Data. If
you specify All as the range of data to be loaded, all formant
motion data will be loaded.
If you specify Single as the range of data to be loaded, a
single formant motion will be loaded. In this case, you’ll
need to specify the load-source and load-destination (“To:”).
3. Press the OK button to execute, or press the Cancel
button to cancel.
To Next Page
Loading...
Need help?
General
