Korg microSTATION - Selecting and Playing Sounds; Selecting Programs

Easy Start Guide
12
Selecting and playing sounds
Selecting programs
Tobegin,let’senterProgrammodeandselectaprogram.
Whenshippedfromthefactory,themicroSTATION’sinternalmemorycontains480programsorganizedinto7
categories.Inthisexample,we’llspecifytheSYNTHcategoryandselectaprogramfromthatcategory.
1. PressthePROGbuttontoenterProgrammode.
ThedisplaywillshowthePROGPLAYpage.ThePROGPLAYpagewillalwaysappearwhenyoupressthe
PROGbutton.
Thelowerlineofthedisplayshowstheindexnumberandtheprogramname.
2. UsetheCATEGORYSELECTbuttonstomaketheSYNTHindicatorlight‐up.
(Thecategoryindicatorsarelocatedtotheleftofthedisplay.)
Thecategoryindicatorsshowthecategorythat’scurrentlyselected.
3. Usethebuttonstoselectaprogram.
Playthekeyboardandlistentothesound.
4. Whenselectingprograms,youcanusetheAuditionfunctiontoplayarifforphrase.
PresstheAUDITIONbuttonlocatedbelowtheREALTIME
CONTROLSknob1;theLEDattheleftofthebuttonwilllight‐up,
andariff(phrase)suitableforthatprogramwillbeplayed
automatically.