122| Converting a MIDI Song to a Style
5 When the conversion is complete, you are asked to write the new Style into
a Style location.
Style name
Style bank
Touch to open the
6 You may change the name of the Style. Touch the Text Edit ( ) icon to
open the virtual keyboard and edit the name.
When done editing the name, confirm by touching the OK button under the
virtual keyboard.
7 When back to the Write Style dialog, if you want to save onto a different
location touch the Select button and open the Style Select window. Choose
a location as if you were choosing a Style. Blank locations are shown as a
series of dashes (‘–––’).
8 When back at the Write Style dialog, confirm the Write operation by touch-
ing the OK button.
9 After writing, select the new Style, and fine-tune it with the functions seen
in this part of the manual.
To Next Page
Loading...
