116| Quick Recording a Backing Sequence Song
Recording
Turn on the metronome
▪ Press the METRO (
) button to turn the metronome on or off while record-
ing. The metronome click will not be recorded with the Song.
Record
1 Select the Style Element you want to use before starting to play. Select any
of the Variations before starting to record. Select one of the Intros to start
with an introduction.
2 Press the START/STOP button to start recording.
A 1-measure precount will play before the recording actually begins. When
it begins, record freely.
3 Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Break,
Ending…) you like. While recording in Backing Sequence Record mode, you
cannot use the Synchro, Tap Tempo, Balance controls.
4 When finished recording your Song, press the START/STOP button to exit
recording, and return to the main page of the Sequencer mode.
5 While in the main page of the Sequencer mode, press the PLAY/STOP (
)
button to listen to the recorded Song.
Saving the Song
When finished recording the new Song, go to the main page of the Sequencer
mode and choose the Save Song command from the page menu to save the
Song. The Save Song window will appear.
Current path
This window is very similar to the Media > Save page. Files are filtered, so
that can only see MIDI Song files (.mid).