Korg PA4X User Manual

74 | The Chord Sequencer
Playing back a Chord Sequence
You can play back the Chord Sequence in memory. The chords driving the
automatic accompaniment will be performed by the recorded sequence.
Play the recorded Chord Sequence
1 Press the CHORD SEQUENCER > PLAY/STOP (
) buttons together to
start playback.
The indicators of the two buttons will start flashing. The Chord Sequence
will be played back in loop starting from the next measure. The chords will
be sent to the arranger, and the Accompaniment will play following the re-
corded chords.
2 Play your solo part, while the Chord Sequence plays the chords for you.
During Chord Sequence looping, you can freely select any Fill or Variation,
as if you where playing chords with your hands.
3 Press the CHORD SEQUENCER > PLAY/STOP (
) buttons together to
stop playback.
As an alternative, press the START/STOP button to stop both the Chord
Sequence and the automatic accompaniment.

Korg PA4X Specifications

General

Polyphony	128 voices
Type	Arranger Keyboard
USB	USB to Host, USB to Device
Keyboard	76 keys (PA4X-76) / 61 keys (PA4X-61), semi-weighted with velocity and aftertouch
Sound Engine	EDS-X (Enhanced Definition Synthesis – Expanded)
Display	7-inch TFT color touchscreen
Connectivity	MIDI In/Out/Thru, USB to Host, USB to Device
Dimensions	PA4X-61: 980 x 364.4 x 125.56 mm
Sounds	512 User Sounds
Sequencer	16-track sequencer
Audio Inputs	2 x 1/4" (line), 1 x XLR (mic)
Audio Outputs	Left/Right, Headphones, Sub 1/2
Storage	Internal SSD and microSD slot
Weight	PA4X-76: 16.3 kg / PA4X-61: 13.9 kg