Korg Pandora Stomp - USB Port and Connectivity; Program and Operation Controls

10
7. OUTPUT jack: Connectyourguitaramp,bassamp,ormixer,etc.tothisjack.
Whenanampisconnected,itisbetterforthesoundifthe
CabinetEffectThrough
function
isturnedon(seep.25).
8. LCD screen: Pleasereferto“LCDscreen”onpage11.
9. USB port: YoucanconnectyourcomputertothisportusingaUSBcablesothat
youwillbeabletoeditPANDORAstompprogramsintheEditorsoftwarethat’s
installedonyourcomputer.Whenyouconnecttheunittoacomputerusinga
USBcable,USBbuspowerissuppliedfromthecompu
ter.
SomecomputersmaybeunabletosupplyUSBbuspower
.Insuchcases,use
abattery,AC adapter(soldseparately)oraself‐poweredhub(thatcan
receivepowerfromanexternalpowersupply).
10. Program Memory buttons (A, B, C and D buttons): Pleaserefertopage13.
11. Power switch:Set thisswitchtoSTANDBYtopoweroff,orsetittoONorto
USBtopow
ertheuniton.
12. Foot switch: You can use the foot switch to perform operations such as turning
effectsonoroff,activating/deactivatingthetunerandselectingaprogram(seep.25).
13. INPUT jack:Connectyourguitar(orbass)tothisjack.
14. Value dial: InPlaymode,usethisdialtoselectaprogram.Inothermodes,use
thisdialtoeditparametersorconfigurevarioussettings.