Korg Pandora Stomp - AMP: Amp Modeling

29
AMP: Amp Modeling
InordertotakefulladvantageofthecharacteristicsofAmpModeling,werecom‐
mendthatyouuseitinconjunctionwithCabinetModelingwhenlisteningthrough
headphonesorwhenrecordingfromthelineoutput.Typesmarkedbyanasterisk(*)
indicateeffectsforbassguitars.
IfyouhaveselectedSYNTHastheeffecttype, usetheValuedialoneachparameter
pagetosetthefilterdepthanddecay,andtoselectandadjustthewaveform(seep.31).
B OD*, B DIST*, B FUZZ* Amount of distortion. (1.0–10.0)
PREAMP1*, PREAMP2*, BALANCE* Adjusts tone. ( 0.0–10.0)
LOWCUT* Specify the frequency. (0.0–10.0)
FRETLES* Adjusts tone. (0.0–10.0)
C, D buttons (TYPE ▲, ▼)Value Dial