Korg Pandora Stomp - Connecting External Devices; Power Save Function

12
Connecting devices
Whenconnectinganexternaldevice(ie‐guitaramp,bassamp,CDplayer,etc.)be
suretoturntheunitoff.
● IfanaudioplayerisconnectedtotheAUXjack,youcanplayalongwithyour
guitarorbass.Howeverthevolumemustbeadjustedfromtheconnecteddevice.
● Useastandardmo
nauralcable
toconnectthePANDORAstomp’sOUTPUTjack
toaguitarorbassamp.OnlytheL(Left)channeloutputwillbeheard.Whenan
ampisconnected,itisbetterforthesoundiftheCabinetEffectThroughfunction
isturnedon(seep.25).
●
PANDORAstomp’soutputlev elandsoundqualitywillvarydependingonwhich
headphonesareused.Werecommendusinggoodqualitylowimpedancehead‐
phones,32Ohmsorlesswithasensitivityratingnear100dB/mWorabove.Many
headphonessoldforusewithportableCDorMp3play erswillworkjustfine.
● UsetheUSBcableifyouwanttoconnectthePANDORAstomptoyourcomputer. 
Power Save function (only when using the AC adapter)
IftherehasbeennouserinputorotheroperationofthePANDORAstompforat
leastfourhours,thePowerSavewillbeisactivatedtoautomaticallyreducepower
consumption.Thisfunctioncanbedisabled(seep.26).WhenthePowerSavefunc‐
tionisactivated,“POWERSAVE”willappearonth
eLCD.Torecover,pressanybut‐
tonor
usethefootswitch.