Korg Pandora Stomp - AMP: EQ and Gain Adjustments; CAB: Cabinet Modeling Parameters

20
Setting the gain [GAIN] (distortion amount) and mid-range
frequency [MIDFREQ] for the selected amp model
CandDbuttons(disabled)/Valuedial(setthevalue)
Adjusting the cut and boost for the high range of the selected
amp model
CandDbuttons(disabled)/Valuedial(setthevalue)
Adjusting the cut and boost for the mid range of the selected
amp model
CandDbuttons(disabled)/Valuedial(setthevalue)
Adjusting the cut and boost for the low range of the selected
amp model
CandDbuttons(disabled)/Valuedial(setthevalue)
Selecting and setting parameters for cabinet modeling
effects
CandDbuttons(selectingtheeffect)/
Valuedial(settingtheparameter)
Thevaluedisplaywillindicate“Gt”forapproximately
onesecondifyou’veselectedaguitarampcab inet,or
“bA”ifyou’veselectedabassampcabinet.