Korg prologue - Page 55

55
Button 2 (GLOBAL 2)
Thisbuonisusedtosetthepolarityofthepedal.
D. Pedal Polarity [- (KORG), +]
Sets polarity to the same polarity as the damper pedal that is connected to the
DAMPERjack.Ifthepolaritiesdonotmatch,thedamperpedalwillnotoperatecor-
rectly.
- (KORG):UsethisseingwhenconnectinganoptionalDS–1Hdamperpedal(sold
separately)oraPS-3/PS-1pedalswitch(soldseparately).ThepolarityofKorgdamp-
erpedalsandpedalswitchesis“–”(

: open type).
+:Usethisseingwhenconnectingdamperpedalswitha“+”polarity(

: cross
type). If the polarities do not match, the damper pedal will not operate correctly.
Button 3 (GLOBAL 3)
These functions relate to performance aspects of the prologue—knob operation, ve-
locitycurves,localseings,andmore.
Local SW [O, On]
The local connection makes a link between the prologue keyboard the soundgen-
eratingcircuitry.Normally,thislinkisOn.However,ifyouareusingtheprologue
with an external sequencer or sequencing software, you will want to set the local
connectiontoOfftoeliminatethedouble-triggeringofnotescausedbyMIDIecho.
O: The prologue’s keyboard will be internally disconnected from the tone generator.
Velocity Curve [Type 1...8, Const 127]
Changing the Velocity Curve allows you to match the dynamic response of the pro-
logue keyboard to your own playing style and technique.
127
64
6
5
4
3
2
1
1
8
7
Soft Keyboard Strong