Korg prologue - Page 59

59
Button 5 (GLOBAL 5)
Theseparametersrelatetotheprologue’sMIDIcapabilities.
MIDI Route [USB+MIDI, USB]
MIDIsignalscanbesentandreceivedviatheMIDIandUSBconnectors,orbythe
USBconnectoralone.
USB+MIDI:MIDImessagesarereceivedviatheUSBBconnectorandtheMIDIIN
connector;messagesaretransmiedfromtheUSBBconnectorandtheMIDIOUT
connector.
USB:MIDImessageswillbetransmiedandreceivedonlyviatheUSBBconnector.
WhenusingtheUSBconnectorasaMIDIinterface,itisadvantageoustousethis
seing.
MIDI Global Ch [1...16]
SpeciestheglobalMIDIchanneloftheprologue.
ThisMIDIchannelisusedtotransmitandreceivenotemessages,pitchbendmes-
sage, data dump messages and control change messages for the main timbre.
 Thesamechannelcannotbeselectedforboth“MIDIGlobalCh”and“MIDI
SubCCCh”.
MIDI Sub CC Ch [1..16]
ThisMIDIchannelisusedtotransmitandreceivecontrolchangemessagesforthe
sub-timbre.
Set the device to which the prologue is connected and the prologue to the same
MIDIchannel.
 Thesamechannelcannotbeselectedforboth“MIDIGlobalCh”and“MIDI
SubCCCh”.
Clock Source [Auto (USB), Auto (MIDI), Internal]
Manyfeaturesoftheprologuecanbesync’dtothetempoorBPM.Thisparameter
allowsyoutospecifywhethertheclocksourceisinternal,oranexternalMIDIClock
Source.
Auto (USB), Auto (MIDI):Whenthereisnoinput,theinternalclockwillbeused;
and when input is detected, the internal clock will be synchronized to the clocks
fromtheUSBBandMIDIINconnectorsrespectively.
Internal: Only the internal clock to be used.
 WhenacableispluggedintotheSYNCINjack,theinternalclockissyn-
chronizedtotheSYNCINjackclock,regardlessoftheMIDIclockseings.