Korg prologue - Page 65

65
Controlling the prologue from an external device
In order to synchronize this instrument to other devices, use a mini cable to connect
theSYNCOUTjackoftheexternaldeviceandtheSYNCINjackoftheprologue.
Setthe“SyncInUnit”oftheprologuetothesameseingasthe“SyncOutUnit”of
the external device.
Setthe“SyncInPolarity”oftheprologuetothesameseingasthe“SyncOutPolar-
ity”oftheexternaldevice.
Referto"Button4(GLOBAL4)"(p.58)fortheseingstomakeontheprologue.
See the owner’s manuals of each respective instrument for how to connect them for
synchronization.
Starting the sequencer of the connected device and the arpeggiator of this prologue
will make the prologue’s arpeggiator sync with the external device.
SYNC IN
prologue
mini cable
SYNC OUT