Korg prologue - Page 69

69
Slaving the prologue clock to an external MIDI device
ConnecttheMIDIINconnectoroftheprologuetotheMIDIOUTconnectoronyour
externalMIDIdevice.
IntheGLOBALEDITmode,settheClockSourceoftheprologueto“Auto(MIDI)”,
andconguretheexternalMIDIdevicetotransmitMIDIclockdata.
TheprologuewillautomaticallyactastheslavewheneveraMIDItimingclockis
received,andwillbedrivenbythetempooftheexternalMIDIdevice(sequencers,
rhythm machines, and so on).
TIP
EvenifyousettheClockSourceto“Auto(USB)”or“Auto(MIDI)”,the
prologuewilloperatein“Internal”MIDIclockmode,unlessaclockisre-
ceived from an external device.