68
MIDI-Related Settings
Setting the MIDI channel
Use the buon5“MIDIGlobalCh”(p.59) and “MIDISubCCCh”(p.59) in the
GLOBALEDITmodetosettheprologue’sMIDIchannel.
TIP
WhensynchronizingtoanexternalMIDIdevice,refertothatdevice’s
Owner’s manual.
Conguring the MIDI “LOCAL” setting when connected to an external MIDI
sequencer or computer
TheEchoBackseingofyourexternalMIDIsequencerorcomputersystemallows
theMIDInotesandothermessagesbeingplayedbytheprologuetobeinstantly
passedalongtoanyotherMIDIequipment,includingsynthesizers,tonegenerators.
However,thissameEchoBackfunctioncancausetheprologuetodoubletrigger:
oncewhenyouplaythenote,andasecondtimeastheexternalMIDIsequencerof
computer system sends the note back to the prologue.
Topreventthisfromhappening,youcansimplydisabletheLOCALconnectionbe-
tween the prologue keyboard and the tone generating circuitry.
TheLOCALfeatureisaccessedusingbuon3“LocalSW”(p.55) intheGLOBAL
EDITmode.
MIDI lter settings
Usetheseseingstocongurewhetherprogramchanges,controlchangesandpitch
bendmessageswillbetransmiedandreceived.
Referto“Buon6(GLOBAL6)”(p.60)fortheseseings.
Synchronizing the arpeggiator playback
Usethe“ClockSource”(p.59) seingonbuon5inGLOBALEDITmodetoset
whether the prologue will be the master (the device controlling the synchronization)
or the slave (the device being controlled) when the arpeggiator is played.
TIP
WhensynchronizingtoanexternalMIDIdevice,refertothatdevice’s
Owner’s manual.
Using the prologue as the master to slave external MIDI devices
ConnecttheMIDIOUTconnectoroftheprologuetotheMIDIINconnectoronyour
externalMIDIdevice(s).
IntheGLOBALEDITmode,settheClockSourceoftheprologueto“Internal”,and
conguretheexternalMIDIdevicetoreceiveclockdataviaMIDI.Theprologuewill
act as the master, and the tempo that is set using the TEMPO buon on the prologue
willbesentasMIDItimingclockdatatooperatetheexternalMIDIdevice(sequenc-
ers, rhythm machines, and so on).