RK-100S Sound Editor Owner's Manual
Page 19
KORG Inc.
Exchanging programs
You can exchange the location of two programs by dragging and dropping one of the two programs while
holding down the [Alt] key (Windows) or [command] key (Mac OS X). As when moving a program, you
can exchange programs located in different pages by dragging one of the programs to the page select tab
of the other page.
Copying a program
Copying a program by dragging and dropping
To copy a program, drag the selected program and drop it onto the desired copy-destination while holding
down the [Ctrl] key (Windows) or [option] key (Mac OS X). The program formerly at that destination
will be overwritten. As when moving or exchanging programs, you can copy a program to a different
page by dragging the program to a page select tab.
Copying a program via the menu
1. Select the copy-source program, and from the "Edit" menu choose "Copy."
2. Select the copy-destination program, and from the "Edit" menu choose "Paste." A duplicate program
will be overwritten onto the copy-destination.
Editing program information
When you select a program and click the [INFO] button, the program information editing dialog box will
appear. Edit the program name or comment, and click the [OK] button. If you decide to cancel the
changes you made, click the [Cancel] button.
"Creator" and "Comment" information is not written into the RK-100S. If a program containing
"Creator" and "Comment" data is written to the RK-100S and then received back into RK-100S
Sound Editor, the "Creator" and "Comment" data will be lost.
Initializing a program
Select the program, and from the "Edit" menu, choose "Initialize." That program will be initialized to the
initial program.
Saving a program to a file
You can save the selected program to your computer as a program data file. Select the program that you
want to save, right-click (in Mac OS X, [control]-click) to display the popup menu, and choose "Save" to
access the "Save program" dialog box. Specify the desired save location, enter a file name, and click the
[Save] button.
Loading a program from a file
Select the program into which you want to load the file, right-click (in Mac OS X, [control]-click) to
display the popup menu, and choose "Open" to access the "Load program" dialog box. Select the program
data file that you want to load, and click the [Open] button.
To Next Page
Loading...
