Korg Trinity Parameter Guide

6–1: Pattern Edit
119
6–1J: Copy To Track
This command copies the contents (musical data) of the pattern specified in the tab 1 display to a
track. Unlike the Put To Track command, the data itself is recorded into the track, and editing the
copied data will not affect the pattern or other locations.
When the Copy To Track command is executed, the data will be affected in the following ways:
• Musical data previously existing in the copy destination measures will be erased.
• The musical data that was copied will be played back using the time signature of the measures
to which it was copied.
Specify the pattern in the tab 1 display, and select this command. The rest of the procedure is the
same as for Put To Track. For details refer to “6–1I: Put To Track.”
1 432
1 432
Pattern 41
Example: Copy the musical data of pattern 41 to measure 2
Before Copy
After Copy

Korg Trinity Specifications

General

Timbrality	16 parts
Oscillators	2 per voice
LFO	2 per voice
MIDI	In, Out, Thru
Year Released	1995
Type	Workstation
Polyphony	32 voices
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Master effects, Insert effects
Sequencer	16-track
Display	TouchView graphical user interface
Filter	Resonant low-pass, high-pass, band-pass
Memory	8 MB internal PCM ROM
Outputs	4 individual outputs, 1 stereo output
Inputs	2 audio inputs
Storage	3.5" floppy disk drive
Weight	15 kg