Korg Trinity Parameter Guide

7–3: T1 E1 (Timbre 1–8 Edit Insert Effect 1)
73
7–3: T1 E1 (Timbre 1–8 Edit Insert Effect 1)
7–4: T1 E2 (Timbre 1–8 Edit Insert Effect 2)
7–5: T1 E3 (Timbre 1–8 Edit Insert Effect 3)
7–6: T1 E4 (Timbre 1–8 Edit Insert Effect 4)
These pages will be displayed if insert effects are selected in “7–2a: Insert Effect Setting.”
Here you can make settings for insert effect parameters.
For details on effect parameters, refer to the separate Effect Guide.
Effect dynamic modulation occurs on the MIDI channels specified for each timbre.
▼ Page Menu Command
7–3A: Write Combination
This command writes an edited combination into the specified combination number. Be sure to
write important combinations. If you turn the power off or select another combination before writ-
ing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, “9. Writing a program or combination”.
Effect Name
Page Menu
7–3A

Korg Trinity Specifications

General

Timbrality	16 parts
Oscillators	2 per voice
LFO	2 per voice
MIDI	In, Out, Thru
Year Released	1995
Type	Workstation
Polyphony	32 voices
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Master effects, Insert effects
Sequencer	16-track
Display	TouchView graphical user interface
Filter	Resonant low-pass, high-pass, band-pass
Memory	8 MB internal PCM ROM
Outputs	4 individual outputs, 1 stereo output
Inputs	2 audio inputs
Storage	3.5" floppy disk drive
Weight	15 kg