Korg Trinity Parameter Guide

7–2: Edit E1 (Edit Insert Effect 1)
50
7–2: Edit E1 (Edit Insert Effect 1)
7–3: Edit E2 (Edit Insert Effect 2)
7–4: Edit E3 (Edit Insert Effect 3)
7–5: Edit E4 (Edit Insert Effect 4)
These pages will be displayed if an insert effect is selected in “7–1a: Insert Effect Setting”.
Here you can make settings for insert effect parameters.
For details on the effect parameters, refer to the separate Effect Guide.
Effect Dynamic Modulation will be controlled on the Global MIDI channel.
▼ Page Menu Command
7–2A: Write Program
This writes the edited program into the specified program number of the specified bank.
Be sure to write important programs. If you turn the power off or select another program before
writing the data, it cannot be recovered.
Refer to Basic Guide page 23, “9. Writing a Program or Combination”.
Effect Name
Page Menu
7–2A

Korg Trinity Specifications

General

Timbrality	16 parts
Oscillators	2 per voice
LFO	2 per voice
MIDI	In, Out, Thru
Year Released	1995
Type	Workstation
Polyphony	32 voices
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Master effects, Insert effects
Sequencer	16-track
Display	TouchView graphical user interface
Filter	Resonant low-pass, high-pass, band-pass
Memory	8 MB internal PCM ROM
Outputs	4 individual outputs, 1 stereo output
Inputs	2 audio inputs
Storage	3.5" floppy disk drive
Weight	15 kg