2–5: OSC EG (Oscillator Envelope Generator)
21
2–5: OSC EG (Oscillator Envelope Generator)
This page contains settings for the oscillator EG that creates time-variant changes in the pitch of
oscillators 1 and 2. The depth of the pitch change produced by this EG is adjusted in “2–1f(2–3f):
Oscillator EG.”
2–5a: OSC EG
Makes Level and Time settings to specify how the pitch will change over time.
Level
The operation of this parameter depends on the setting of “2–1f(2–3f): Oscillator EG” Intensity. For
example with a setting of +12.00, a setting of +99 will raise the pitch one octave, and –99 will lower
the pitch one octave.
Start (Start Level) [–99…+99]
Sets the pitch level at which the sound will begin at the time of Note-on.
Attack (Attack Level) [–99…+99]
Sets the pitch level that will be reached when the Attack Time has elapsed.
Release (Release Level) [–99…+99]
Sets the pitch level that will be reached when the Release Time has elapsed.
Time
Specifies the times over which the pitch will change.
Attack (Attack Time) [0…99]
Sets the time from note-on until the pitch specified by the Attack Level is reached.
Decay (Decay Time) [0…99]
Sets the time from when the Attack Level is reached until the normal pitch is reached.
Release (Release Time) [0…99]
Sets the time from note-off until the pitch specified by the Release Level is reached.
2–5a
2–5b
Page Menu
2–5A
2–5B
2–5C
Note-on
Note-off
Attack
Time
Decay Time
Start Level
Release Level
Release Time
Attack Level
+99 = approximately one octave
–99 = approximately one octave
0 = the pitch
reached when
the key remains
pressed
Time
Settings for time-variant pitch change (when EG Intensity = +12.00)
To Next Page
Loading...
Need help?
General
