Korg Trinity Parameter Guide

8–2: Edit E1 (Edit Master Effect 1 [Modulation])
76
8–2: Edit E1 (Edit Master Effect 1 [Modulation])
8–3: Edit E2 (Edit Master Effect 2 [Reverb/Delay])
Here you can make parameter settings for the master effects.
These pages will be displayed when you select a modulation-type or reverb/delay-type effect for
[Modulation] and [Reverb/Delay] in “8–1a: Master Effect Setting”.
For details on effect parameters, refer to the separate Effect Guide.
Effect dynamic modulation occurs on the Global MIDI channel.
▼ Page Menu Command
8–2: Write Combination
This command writes an edited combination into the currently selected combination number. Be
sure to write important combinations. If you turn the power off or select another combination
before writing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, “9. Writing a program or combination”.
Effect Name
Page Menu
8–2A

Korg Trinity Specifications

General

Timbrality	16 parts
Oscillators	2 per voice
LFO	2 per voice
MIDI	In, Out, Thru
Year Released	1995
Type	Workstation
Polyphony	32 voices
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Master effects, Insert effects
Sequencer	16-track
Display	TouchView graphical user interface
Filter	Resonant low-pass, high-pass, band-pass
Memory	8 MB internal PCM ROM
Outputs	4 individual outputs, 1 stereo output
Inputs	2 audio inputs
Storage	3.5" floppy disk drive
Weight	15 kg