8–1: Master Effects
127
8–1c: Return 1/2 [0…127]
Adjusts the level of the audio signals sent from [Modulation] and [Reverb/Delay] to output jacks
1/L/MONO and 2/R.
The audio signals from Pan L and R will be mixed with the Effect 1 output adjusted by these
Return 1 and 2 levels, and output from output jacks 1/L/MONO and 2/R.
8–1d: Low/High Gain
Adjusts the tonal character of the audio signal that is output from output jacks 1/L/MONO and
2/R. The units are in [dB].
Low Gain [–18.0…+18.0]
Adjusts the level of the low frequency range.
High Gain [–18.0…+18.0]
Adjusts the level of the high frequency range.
▼ Page Menu Command
8–1A: Memory Status
This command displays the remaining amount of sequencer memory.
8–1B: Copy Master Effect
This command copies master effect settings from a specified program, combination or song to the
master effect of the currently selected song.
To Next Page
Loading...
