Korg Trinity Parameter Guide

2–1: Pitch
62
2–1e: Bend Range [PRG, –24…+24]
Specifies the range (in chromatic steps) of the pitch change that will occur when the pitch bender
is operated.
With a setting of
PRG , the pitch bend range specified by the program will be used.
With a setting of
–24 to +24 , the pitch bend range will be as specified here, regardless of the setting
of the program.
▼
Page Menu Command
2–1A: Write Combination
This command writes an edited combination into the specified combination number. Be sure to
write important combinations. If you turn the power off or select another combination before writ-
ing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, “9. Writing a program or combination”.

Korg Trinity Specifications

General

Timbrality	16 parts
Oscillators	2 per voice
LFO	2 per voice
MIDI	In, Out, Thru
Year Released	1995
Type	Workstation
Polyphony	32 voices
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Master effects, Insert effects
Sequencer	16-track
Display	TouchView graphical user interface
Filter	Resonant low-pass, high-pass, band-pass
Memory	8 MB internal PCM ROM
Outputs	4 individual outputs, 1 stereo output
Inputs	2 audio inputs
Storage	3.5" floppy disk drive
Weight	15 kg