Kostal ENECTOR - Equipment Features

To Next Page

To Previous Page

Product description

1 12345678910111213141516

2.1Equipment features

■

Mode 3 charging power from 1.4 kW single-phase up to 11 kW three-phase

(mode 3 according to IEC 61851 - charging mode for vehicles with communication in-

terface to type 2 charging plugs and sockets)

■ No authorisation

■ Status information via LED display panel

■ 7.5 m permanently connected type 2 charging cable

(type 2 according to IEC 62196-2 - single-phase and three-phase charging plugs and

sockets with identical plug geometry for charging powers from 3.7 to 44 kW AC)

■ Integrated DC residual current monitoring > 6 mA

■ (only one type A RCD is required for pre-installation)

■ Terminals in the device for connecting an optional push-button for switching conveni-

ence functions (additional activation code required)

■ Terminals in the device for connecting an energy meter/energy manager (KOSTAL

Smart Energy Meter) via Modbus RTU

■ Charging modes: Lock Mode (lock wallbox), Solar Pure Mode (solar charging) or Solar

Plus Mode (solar-optimised charging) available (PV system and KOSTAL Smart Energy

Meter with activation code required)

■ Welding Detection (protective measure for monitoring the load relays)

■ Temperature monitoring

■ Integrated cable holder

■ Wired ready for connection

■ Outdoor installation possible (wallbox: IP54, coupling/plug: IP44)