Kostal ENECTOR - Operating Modes

Product description
1 12345678910111213141516
© 2022 KOSTAL Solar Electric GmbH22
2.5Operating modes
The wallbox has various operating modes.
NOTE
The operating mode depends on the configuration (settings via DIP switches) of the wall-
box
Commissioning/configuration,Page56.
A push-button (available as an option) can also be installed in the wallbox
Installation
of optional push-button,Page52.
ENECTOR without energy meter
Power Mode (simple charging)
The electric vehicle is charged at maximum power.
ENECTOR with convenience functions via KOSTAL Smart Energy Meter
NOTE
In order for the wallbox to be set up for the convenience functions in the KOSTAL Smart
Energy Meter (KSEM), this function must first be activated via an activation code in the
KSEM.
The activation code can be purchased from the KOSTAL Solar online shop.
To access the shop, go to:
shop.kostal-solar-electric.com.
NOTE
A list of approved energy meters and their purpose is available in the download area for
the product on our homepage at
www.kostal-solar-electric.com/released-energy-meters-wallbox
Blackout protection (house connection monitoring)
The house connection is monitored when charging the electric vehicle. If the maximum con-
nected load (e.g. 63 A) is exceeded, the charging power is reduced or charging is interrup-
ted.