Setting up wallbox in the KSEM
1 12345678910111213141516
© 2022 KOSTAL Solar Electric GmbH74
7.1Possible configurations
The wallbox must be set up in the KOSTAL Smart Energy Meter (KSEM) so that the KSEM
can control the wallbox or the wallbox can read data from the KSEM.
There are two ways of doing this:
■ ENECTOR with KOSTAL Smart Energy Meter and convenience functions. The KSEM is
an energy manager (master) and sends control signals to the wallbox.
Setting up
ENECTOR with convenience functions in the KSEM,Page75
■ ENECTOR with KOSTAL Smart Energy Meter for blackout protection (house connection
monitoring). The KSEM is an energy meter (slave) and the wallbox reads data from the
KSEM.
ENECTOR with KOSTAL Smart Energy Meter for blackout protection
(house connection monitoring),Page78
To Next Page
Loading...