Updating firmware
1 12345678910111213141516
© 2022 KOSTAL Solar Electric GmbH89
6.Launch configuration software on the PC. A description of the configuration software
is included in the software package.
7.Install new firmware on wallbox via the configuration software.
8.De-energise device via line circuit breaker.
9.Remove connection between PC and wallbox again.
10.Fold up the housing cover.
11.Screw the housing cover and lower part of the housing together. Torque: 1.2 Nm.
12.Switch on wallbox via the line circuit breaker.
✔ The update has been carried out.
To Next Page
Loading...