Kramer VW-4 - VW-4 Input Settings Management; Setting EDID Options; HDCP Configuration for Inputs

Kramer Electronics Ltd.
VW-4 – Configuring VW-4
16
Changing the Device ID Number
The ID-NAME area lists the devices in the order they were discovered and connected: “0” is
the first, “1” the second, and so on. You can change that order to match your video-wall
configuration.
To change the ID of a device:
1. Select the Settings tab.
2. Place cursor next to the ID.
Figure 12: ID-NAME List
3. Change the ID number for each device and press ENTER on your PC.
Figure 13: ID-NAME Changed
The device ID number has changed and is saved.