Kramer VW-4

Kramer Electronics Ltd.
VW-4 – Configuring VW-4
11
DIP 1
DIP 2
DIP 3
DIP 4
Columns x Rows Layout
Notes
Four VW-4 Devices
ON
ON
OFF
OFF
4x4 wall, first unit (0)
ON
ON
OFF
ON
4x4 wall, second unit (1)
ON
ON
ON
OFF
4x4 wall, third unit (2)
ON
ON
ON
ON
4x4 wall, fourth unit (3)
Using the VW-4 App
Use the VW-4 Windows® Control Software app to configure a video-wall of up to 8x8,
consisting of one or more VW-4 devices.
Download app from www.kramerav.com/product/VW-4#Tab_Resources).
VW-4 app enables performing the following actions:
• Connecting VW-4 Devices to the Network on page 12.
• Configuring Device Settings on page 15.
• Configuring Device Layout on page 21.
In the following example, two VW-4 devices are used to configure a 3x2 video-wall.
We recommend that you first arrange the displays on the video-wall and then configure the
devices using the VW-4 App.