44 Krell Showcase Processor
After the selections for analog audio inputs are entered, press the
previous key. You return to the
ASSIGN AUDIO INPUTS screen. Select
DIGITAL. The ASSIGN DIGITAL AUDIO INPUT screen appears.
Use the direction and enter keys to scroll through and select the digi-
tal device you want to configure, select the digital input, and choose
the default mode for the four major surround sound digital formats:
Dolby Digital 2.0, Dolby Digital 5.1, DTS 5.1, and PCM. Each of
these signals has options under
DEFAULT MODE. If a THX Surround EX
or DTS ES encoded disc is played, the Showcase Processor will
automatically select one of these modes.
The digital input must be set to DISABLED to use the analog input.and it must
be set to DISABLED to use preamp mode.
PREVIOUS holds the last selected digital input.
The
DOLBY DIGITAL EX, DOLBY D 5.1 + THX SURR EX, DTS-ES DISCRETE 6.1, and-
DTS-EX MATRIX 6.1 operating modes are available only when your system has
6 or 7 channels.
When the device is configured, press the previous key (74) twice to
return to the
CONFIGURE DEVICES menu.
System Configuration, continued
Assign Digital Audio
Inputs
Notes
Assign Digital Audio
Input Screen
Assign Analog Audio Inputs,
continued
AUTO-MIGRATION ON allows the Showcase Processor to switch to the
analog input automatically, a feature that is particularily useful for
SACD players.
The analog signal must be assigned, not
DISABLED, in order for auto-
migration to be active.
To Next Page
Loading...
