Krell Industries Showcase - Page 69

Krell Showcase Processor 65
System Configuration,
continued
Room EQ Setup Screen
Room EQ Setup
SHOWCASE
-ROOM EQ SETUP-
MEMORY
CHANNEL
 OFF 
N/A
FILT
TYPE
FREQ
SHAPE
LEVEL
I
N/A
N/A
N/A
N/A
II
N/A
N/A
N/A
N/A
III
N/A
N/A
N/A
N/A
APPLY
The final item on the
OPERATION menu, ROOM EQ SETUP, allows you to
adjust your loudspeaker to your listening area using the Krell Digital
Room Equalizer. Select
ROOM EQ SETUP from the OPERATION menu. The
ROOM EQ SETUP screen appears, with the cursor blinking at
OFF:
Use the direction and enter keys on the Showcase Processor remote
control to scroll through and select the following step-by-step options
for audio operation:
MEMORY
Navigate to one of the four memory locations and enter your selec-
tion. When the Memory field is set to
OFF (the factory default), all of
the filters are disabled.
CHANNEL
Navigate to CHANNEL and select ALL to apply your configurations to all
channels at once or select any individual channel to apply your con-
figurations to that channel. Enter your selection.
IMPORTANT
The selection
ALL overrides individually configured channels.