66 Krell Showcase Processor
System Configuration, continued
Room EQ Setup
continued
Note
TYPE
Navigate to TYPE, and configure one, two, or all of the three bands
(I, II, III) for
FREQ, SHAPE, and LEVEL.
It is not necessary to configure all three filters, you may configure only one
or two filters.
Not all parameters are adjustable for all filter types.
APPLY
Select APPLY and set the selection, if you want to hear your configura-
tion. The Room EQ Setup configurations you have just selected audi-
ble if you have a source device playing.
After selecting the appropriate loudspeaker configurationfor your sys-
tem, press the previous key (74) twice to return to the main configu-
ration menu.
Exit the main configuration menu by pressing the menu key (82) on
the remote. The Showcase Processor is now in the operational
mode.
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
To Next Page
Loading...
