Krom Schroder IC 20 - IC 40 Function


ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 


โทร: 02-888-3472 โทร: ออกแบบ:08-08-170-170 แฟกซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
4 IC 40 function
The actuator IC 40 moves the butterfly valve towards 0° or
90°. There are 4 possible positions which the actuator can
approach in steps. Any intermediate position is possible in
continuous three-point step mode. Optionally, the
actuator can also approach any intermediate position
via an additional current input.
The slow flashing blue LED indicates that the motor of
actuator IC 40 is moving. The position indicator on the
housing indicates the opening angle. Further visualization
and operation are performed on a PC using the
Kromschröder BCSoft
®
software.
BCSoft
®
The sequence of opening and closing is programmed
using the BCSoft
®
software and can be adapted
individually to any application.
All settings for the actuator IC 40 are made using BCSoft
®
.
Commissioning and calibration of the “closed” position
are performed conveniently using the software.
BCSoft
®
offers the option of moving and setting the butter-
fly valve in Manual mode via the actuator, see page 60
(Manual mode).
A detailed manual is available for the BCSoft
®
software:
http://www.docuthek.com
Products 03 Valves and butterfly valves
Actuators IC 20, IC 40.