Krom Schroder IC 20 - IC 40, Staged Control; IC 40, Staged Control with Three Burner Capacity Levels


ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 


โทร: 02-888-3472 โทร: ออกแบบ:08-08-170-170 แฟกซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
Application > Examples of application
1.1.4 IC 40, staged control
For processes that require a
homogeneous temperature
distribution in the
furnace. The actuator IC 40 is
controlled by a two-point controller
and operates in On/Off or High/Low
intermittent mode.
The actuator closes when the voltage
supply is interrupted. The running time
can be adjusted between 5 and 25
seconds.
1.1.5
IC40,stagedcontrolwiththreeburner
capacity levels
For processes that require a
homogeneous temperature
distribution in the furnace and three
burner capacity levels. The actuator
IC 40 is controlled by a
programmable controller and works
in High/Medium/Low or High/Medium/
Low/Off intermittent mode. This allows
the ignition stage to be started. The
optional pressure switch provides fail-
safe monitoring of the maximum pilot
air volume. The actuator running time
can be adjusted between 5 and 50
(75) seconds.