ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี
โทร: 02-888-3472 โทร: ออกแบบ:08-08-170-170 แฟกซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
IC 40 function > Parameters
4.7.2 Factory default parameters
Factory default parameters are data saved permanently in
the unit and which can be viewed in BCSoft®. This includes
motor data and calibration data.
In addition, information on which parameter set was
entered in the condition as delivered is also saved in the
factory default parameters, see page 54 (Parameter sets).
Certain special functions can be programmed with this,
changing the behaviour of the digital inputs, see page 57
(Switching logic).
56
To Next Page
Loading...
