Krone Swadro 46 T Operating Instructions

III - 2
Operating preparations
3.3 PTO shaft
3.3.1 General
Switch off the engine after coupling
the rotary swather to the swinging
drawbar. Remove the ignition key.
Secure the tractor from rolling away!
The PTO shaft is fitted with an overload coupling.
Overload couplings protect the tractor and
implement from damage. The overload coupling
setting must not be altered. The guarantee will
become void if the set torque changes due to the
overload coupling being tampered with.
The torque is limited once there is overloading and
is transferred as a pulse during the slip time.
To prevent the overload coupling from wearing
out prematurely, the PTO shaft should be
disengaged immediately once
the overload coupling responds.
Compare the relevant RM torque value with
the value given in the following table.
If these values do not tally, please consult
your Krone dealer.
Type
Torque (RM)
Swadro 46 T 550 Nm
KS-0-036
RM
SW46T002_1

Krone Swadro 46 T Specifications

General

Brand	Krone
Model	Swadro 46 T
Category	Farm Equipment
Language	English