V - 1
Service and maintenance
5 Service and maintenance
5.1 Special safety instruction
• Before correcting any operational faults or carrying out any repair, maintenance or cleaning
work, always disengage the driving system, stop the engine and remove the key from the
ignition!
• Avoid oil and grease coming into contact with the skin.
• Contact a doctor immediately for injuries caused by escaping oil.
• Follow all other safety notes to avoid injuries and accidents.
5.2 General
Certain maintenance and service intervals should be observed to guarantee correct operation
of the rotary swather and to reduce wear and tear. These include, amongst other things, cleaning,
greasing, lubricating and oiling parts and components.
Regularly check (all 50 h) that nuts and bolts are properly seated and tighten if necessary!
Seeing following tables for torques.
Torque moments M
A
(unless otherwise stated)
A = thread size
(the grade is given on the head of the screw)
A
5.6
29
42
2,2
4,5
7,6
18
37
64
100
160
4,4
8,7
15
36
72
125
200
215
310
1050
330
350
M 4
M 5
M 6
M 8
M 10
M 12
M 14
M 14x1,5
M 16
M 16x1,5
M 20
M 24
6.8
M (Nm)
8.8 10.9
A
O
/
12.9
M 24x1,5
M 24x2
M 27
M 27x2
M 30
5,1
10
18
43
84
145
235
255
365
2450
390
3,0
5,9
10
25
49
85
135
145
210
225
730
710
1220
1350
1800
1950
2100
1150
1550
1650
1450
800
1100
1150
610
425
8
.
8
1
0
.
9
A
To Next Page
Loading...
Need help?
General
