I - 1
General Information
KS300118
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10, D 48480 Spelle
Jahr
Année
Masch. Nr
No. de série
Type
Made in
W.-Germany
1 General Information
The operating manual contains basic instructions to be
observed when attaching, operating and doing maintance
work. Therefore it is imperative that the operating personnel
have access to and read this operating manual before
putting into operation and using the implement.
Follow both the general safety instructions contained in the
section on safety and the specific safety instructions
contained in the other sections.
1.1 Proper Use
The Swadro rotary windrower is used to swath cut hay.
It is installed inside the CAT II three-point hitch at the rear.
1.2 Specifications
1.2.1 Manufacturer's Address
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 0 59 77/935-0
Fax: (49) 0 59 77/935-339
E-mail: info.ldm@krone.de
1.2.2 Certification
EC Declaration of Conformity
corresponding to the EC Directive
See reverse side of title page
1.2.3 Identification
The machine data are listed on the identification plate.
The entire identification plate re-
presents a legal document and should
not be altered or rendered illegible!
1.2.4 Data Required for Inquiries and
Orders
When making inquiries concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of manu-
facture.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability for
damage which results.
Vehicle
ID no.
Type
Year
To Next Page
Loading...
