I - 2
General Information
1.2.5 Proper Use
The Swadro rotary windrower is designed exclusively for
usual applications during agricultural work (proper use).
Any further use is considered to be improper use. The
manufacturer is not liable for any damage resulting from
such use. Such use is solely at the operator's risk.
Part of the proper use is the adherence to the operating,
maintenance and repair instructions specified by the
manufacturer.
1.2.6 General Specifications
Driving on roads is only permissible with the swath arms in
the transport position.
The max. height of 4 m must not be exceeded.
Type Swadro 35 Swadro 38 Swadro 42 Swadro 46
Three-point linkage (Connection CAT I + CAT II) standard
Tandem axle standard
Number of arms Piece 10 10 13 13
Number of double tines Piece 3 4 4
Working width approx. mm 3500 3800 4200 4600
Swath disc diameter approx. mm 2700 2960 3300 3600
Height in transport position approx. mm 2210 2210 2500 2700
Height in operating position approx. mm 1550
Length approx. mm 3020 3300 3600 3900
Width in transport position approx. mm 1900 1900 2265 2550
Maximum width in operating position approx. mm 3500 3800 4200 4600
Power requirement app. kW/PS 26/36 26/36 37/50
PTO shaft speed max. permitted drive speed 1/min. max. 540 U/min
PTO shaft speed recommended operating 1/min max. 350-450 U/min
drive speed
Equivalent continous sound pressure level below 70 dB(A)
Acreage capacity ca./h 3 - 3,5 3,5 - 4 4 - 4,5 4,5 - 5
Tyres 16 x 6.50-8
Tyre pressure bar 1.5
lighting voltage Volt 12
Weight of machine [kg] 510 565 640 665
To Next Page
Loading...
