Edit Settings
105
Edit Settings
General Communication
Note: The communication settings for the device must match the corresponding
settings that you enter in the host application.
Server-Initiated
1. Tap Edit Settings.
2. Tap General Communication.
3. Server–Device Initiated: Tap Server-Initiated.
4. Device ID: Enter the same ID that you enter in the host application (on the
Device Configuration page, select Communication Settings >
Communication Settings tab).
5. Tap Submit.
Note: For Server-Initiated communication, you must also enter the IPV4
configuration settings. See “IPV4 Configuration” on page 107.
Device-Initiated
1. Tap Settings.
2. Tap Communication Settings.
3. Tap General Communication.
To Next Page
Loading...
