Kronos InTouch DX - Date and Time; Audio

Edit Settings
111
4. Enter the Proxy Server IP address.
5. Enter the Proxy Server Port.
6. Select the Proxy Server Type:
– HTTP
– SOCKS5
7. Tap Submit.
The changes you submitted are effective immediately. Traffic from the
timeclock will now be routed through the proxy server to the network.
Date and Time
Use the Date and Time setting to set the date and time on the timeclock.
1. Tap Edit Settings.
2. Tap Date and Time. The values default to the current date and time.
3. Year: Enter the year (four-digit format).
4. Month: Enter the month (numeric format).
5. Day: Enter the date.
6. Time: Tap the field; the time selector opens. Enter the time (the system
automatically formats it). Tap the AM/PM key to toggle between AM and
PM, and tap Enter.
7. Tap Save Settings.
Note: When the timeclock establishes a connection with the host application, the
latter resets the date and time on the timeclock to match its own settings.
Audio
Use the Audio settings to configure the tones that the device emits.
1. Tap Edit Settings.
2. Tap Audio.