Run Tests
127
Run Tests
Sequential
Use this test to execute the Display, LED, and Tone tests, in succession. When the
beeper emits two tones, the test is complete.
Note: You can run each test included in the Sequential Tests function individually,
using each test’s maintenance function.
1. Tap Tests.
2. Tap Sequential. The tests execute automatically.
Communications
Note: The Communications test is available only on devices that use device-
initiated communication. On devices that use server-initiated communication, use
the Test Device function in the host application. Access the Device Details page,
open the Troubleshooting menu, and select Test Device.
To Next Page
Loading...
