Chapter 4 Maintenance Mode Functions
108
8. Speed—tap one of the following:
–Auto
– 10 Full Duplex
– 10 Half Duplex
– 100 Full Duplex
– 100 Half Duplex
9. Primary DNS Server: Enter the IP address and tap Enter.
10. (Optional) Secondary DNS Server: Enter the IP address and tap Enter.
11. Tap Review.
12. Tap Submit.
Connect to Network
Ethernet
1. Tap Edit Settings.
2. Tap Connect to Network.
3. Tap Ethernet.
4. Do one of the following:
–Tap Static IP. Go to the next step.
–Tap DHCP. Go to step 6.
5. Complete the following fields:
– IP Address: Enter the IP address for this timeclock.
– Subnet Mask: Enter the IP address for the sub-network.
– Gateway Address: Enter the gateway IP address.
– Primary DNS: Enter the IP address for the primary DNS server.
6. Tap Save Configuration.
To Next Page
Loading...
