Kronos InTouch DX - Network Connectivity

Run Tests
131
3. Swipe the badge that you are testing, and tap the play button. The information
that appears depends on the type of badge you are testing. It can include the
following:
– Badge data
– Badge type
– Barcode length
– Company code
– String Part1
– String Part2
– String Part3
Network Connectivity
This test verifies that the timeclock can communicate with the network using
TCP/IP.
1. Tap Run Tests.
2. Tap Network Connectivity.
3. Enter the IP address, URL, or FQDN (fully qualified domain name) for the
primary server. If the test was successful, a confirmation message appears.