Edit Settings
109
Wi-Fi
Supported Wi-Fi networks
InTouch DX supports connections to wireless local area networks (WLAN) that
meet the following requirements:
• 802.11 b, g, or n 2.4 GHz compatible wireless local area networks.
• WPA and WPA2 Personal and Enterprise security protocols.
InTouch DX does not support connections to networks with the following
characteristics:
• CDMA/3g/4g or any other type of cellular wireless network.
• Wi-Fi networks that require a secondary password or confirmation via a web
browser.
Configure settings
The timeclock supports only DHCP connections for Wi-Fi.
Note: The timeclock can take up to several minutes to make the wireless
connection. A confirmation page indicates whether the connection was successful.
After you complete the Wi-Fi settings, ensure that the IPV4 settings are
configured correctly for the Wi-Fi network (see “IPV4 Configuration” on page
107).
1. Tap Edit Settings.
2. Tap Connect to Network.
3. Tap Wi-Fi.
4. Slide the OFF button to ON.
5. Tap the appropriate network from the list.
6. Tap Connect to network.
7. Scroll to and tap the Identity field.
8. Use the keypad to enter the user name (for example,
john.doe@company.com) and tap Next.
To Next Page
Loading...
